We roll-form R-Panel in our own shop at 3505 Lee Blvd and cut every panel to your exact lengths. No stock sizes, no waste, most orders ready same-day or next-day.
Free quotes. Se habla español.
R-Panel is the most-used metal panel in West Texas and southern New Mexico, and the reason is simple: it is strong, economical and fast to put up. You see it on warehouses, shops, barns, carports, self-storage and metal buildings all over the Borderland — roofs and walls alike. The purlin-bearing leg makes it the default on steel-frame buildings, and it works over solid decking just as well.
If you are choosing between panels: R-Panel is the value pick and covers the large majority of jobs in this market. Standing seam hides the fasteners and lasts longer, at a higher cost. Ask us and we will tell you which one your job actually needs — including when the answer is the cheaper one.
| Profile | R36 |
|---|---|
| Net coverage | 36" (3 ft) |
| Rib height | 1-1/4" |
| Rib spacing | 12" on center |
| Standard gauge | 26GA — always in stock |
| Other gauges | Heavier steel gauges and aluminum available on order — ask us |
| Lengths | Cut to order, to your exact measurements. Precut minimum 5'-0"; lengths available to 38' |
| Colors | 12 standard 26GA colors — see the chart below |
| Fastening | Exposed fastener — metal-to-wood or metal-to-steel |
| Uses | Roof and wall, residential and commercial |
Every one of these is a stock 26GA color, and the matching trim, closures and color-matched screws come out of the same shop — so the whole roof arrives one shade.
Colors shown on screen are approximate and may vary from the actual finish. Ask for the printed color chart or a physical chip before you decide.
Matching ridge, rake, eave and drip, valley and sidewall trim, bent in-house in 26GA to match your panel color. Butyl tape, color-matched screws, closure strips, flashings and roof jacks. One order, one pickup, and nothing arrives a shade off.
That last part matters more than people expect. Trim ordered from a second supplier almost never matches, and by the time you notice, it is on the roof.
See the full range of roof and wall accessories, and our metal siding options.
Doña Ana County customers don’t have to drive to El Paso. R-Panel is cut to your exact lengths and picked up at our Las Cruces yard — All Precision Metal Depot, 550 S Compress Rd — in the same 12 stock 26GA colors, with the matching trim to go with it. Bring your measurements to the counter, call them in, or send photos and a sketch.
Las Cruces: Monday–Friday, 7:30 AM–4:30 PM · El Paso: Monday–Friday, 7:30 AM–4:00 PM · both closed Saturday and Sunday.
See the Las Cruces location page for directions, the phone number and what else is stocked there.
También cortamos Panel R en Las Cruces — All Precision Metal Depot, 550 S Compress Rd. Los mismos 12 colores estándar en calibre 26 y la lámina de trim que combina. Lunes a viernes de 7:30 AM a 4:30 PM. Vea la página de Las Cruces.
Bring your measurements, your plans, or just photos of the job. We will spec panels, trim and fasteners and quote it free.
El Paso: (915) 781-7074 · 3505 Lee Blvd, Buildings A & B
Monday–Friday, 7:30 AM – 4:00 PM
Las Cruces: (575) 210-7010 · 550 S Compress Rd
Monday–Friday, 7:30 AM – 4:30 PM
Prefer to write it out? Send us your job details and we’ll come back with a quote. You can also see finished work in our project gallery.
Formamos el Panel R en nuestro propio taller en 3505 Lee Blvd y cortamos cada panel a la medida exacta de su proyecto. Sin medidas de catálogo, sin desperdicio, y la mayoría de los pedidos listos el mismo día o al siguiente.
Llame al (915) 781-7074 (El Paso) o al (575) 210-7010 (Las Cruces) para una cotización gratis.
El Panel R es el panel de metal más usado en el oeste de Texas y el sur de Nuevo México, y la razón es sencilla: es fuerte, económico y rápido de instalar. Lo ve en bodegas, talleres, graneros, cocheras, mini-bodegas y edificios metálicos por toda la región — igual en techo que en pared. Su pata de apoyo lo hace el panel de siempre para estructuras de acero, y también funciona bien sobre cubierta sólida.
Si está decidiendo entre paneles: el Panel R es la opción de mejor valor y cubre la gran mayoría de los trabajos de esta región. El standing seam esconde la tornillería y dura más, a mayor costo.
Los colores mostrados son aproximados y pueden variar del acabado real. Pida la carta de colores impresa o una muestra física antes de decidir.
| Perfil | R36 |
|---|---|
| Cobertura neta | 36" (3 pies) |
| Altura de costilla | 1-1/4" |
| Separación de costillas | 12" a centros |
| Calibre estándar | 26GA — siempre en existencia |
| Otros calibres | Calibres más gruesos y aluminio sobre pedido |
| Largos | Cortado a su medida exacta. Mínimo precortado 5'-0"; hasta 38' |
| Colores | 12 colores estándar calibre 26 — vea la carta arriba |
| Fijación | Tornillo expuesto — a madera o a acero |
| Usos | Techo y pared, residencial y comercial |
Molduras de caballete, borde, alero, valle y pared lateral, dobladas aquí mismo en calibre 26 del color de su panel. Cinta de butilo, tornillos del color, cierres, flashings y botas para tubería. Un solo pedido, una sola recogida, y nada llega de un tono distinto.
El Paso: (915) 781-7074 · 3505 Lee Blvd, Edificios A y B
Lunes a viernes, 7:30 AM – 4:00 PM
Las Cruces: (575) 210-7010 · 550 S Compress Rd
Lunes a viernes, 7:30 AM – 4:30 PM
